www.vishay.com for technical questions, contact: tantalum@vishay.com document number: 40081 149 revision: 19-jan-10 t95 vishay sprague solid tantalum chip capacitors, t antamount ? , hi-rel cots, conformal coated case features ? high reliability; weibull grading available ? surge current testing per mil-prf-55365 options available ? standard and low esr options ? terminations: snpb, standard. 100 % tin available ? compliant to rohs directive 2002/95/ec performance/electrical characteristics operating temperature: - 55 c to + 85 c (to + 125 c with voltage derating) capacitance range: 0.1 f to 680 f capacitance tolerance: 20 %, 10 % standard voltage rating: 4 wvdc to 50 wvdc note (1) weibull 0.1 % may not be available on all ratings. see detail ed notes in ratings table or c ontact marketing for availability ordering information t95 d 107 k 010 e a a s type case code capacitance capacitance tolerance dc voltage rating at + 85 c termination and packaging reliability level surge current esr see ratings and case codes table. this is expressed in picofarads. the first two digits are the significant figures. the third is the number of zeros to follow. k = 10 % m = 20 % this is expressed in volts. to complete the three-digit block, zeros precede the voltage rating. a decimal point is indicated by an ?r? (6r3 = 6.3 v). e: sn/pb solder/7" (178 mm) reels l: sn/pb solder/7" (178 mm) ? reel c: 100 % tin/7" (178 mm) reels h: 100 % tin/7" (178 mm) ? reel y = r-case only: sn/pb solder, side mounted, 7" reels a = 1.0 % weibull b = 0.1 % weibull (1) s = hi-rel standard burn-in z = non- established reliability a = 10 cycles at + 25 c b = 10 cycles at - 55 c/+ 85 c s = 3 cycles at + 25 c s = std l = low dimensions in inches [millimeters] case code l (max.) w h a b d (ref.) j (max.) a 0.146 [3.7] 0.072 + 0.012 [1.8 + 0.3] 0.056 + 0.012 [1.4 + 0.3] 0.031 0.012 [0.80 0.30] 0.085 0.016 [2.2 0.4] 0.115 [2.9] 0.004 [0.1] b 0.158 [4.0] 0.110 + 0.012 - 0.016 [2.8 + 0.3 - 0.4] 0.075 + 0.012 - 0.024 [1.9 + 0.3 - 0.6] 0.031 0.012 [0.80 0.30] 0.097 0.016 [2.5 0.4] 0.138 [3.5] 0.004 [0.1] c 0.281 [7.1] 0.126 0.012 [3.2 0.3] 0.098 0.012 [2.5 0.3] 0.051 0.012 [1.3 0.30] 0.180 0.024 [4.6 0.6] 0.236 [6.0] 0.004 [0.1] d 0.293 [7.5] 0.170 0.012 [4.3 0.3] 0.110 0.012 [2.8 0.3] 0.051 0.012 [1.3 0.30] 0.180 0.024 [4.6 0.6] 0.253 [6.4] 0.004 [0.1] r 0.283 [7.2] 0.235 + 0.012/- 0.024 [6.0 + 0.3/- 0.6] 0.136 0.012 [3.5 0.3] 0.051 0.012 [1.3 0.30] 0.180 0.024 [4.6 0.6] 0.243 [6.2] 0.004 [0.1] s 0.143 [3.63] 0.072 0.008 [1.83 0.2] 0.048 0.008 [1.22 0.2] 0.023 0.010 [0.58 0.25] 0.085 0.015 [2.16 0.37] 0.115 [2.9] 0.004 [0.1] note ? the anode termination (d less b) will be a minimum of 0.010" (0.25 mm) * pb containing terminations are not rohs compliant, exemptions may apply l a b d max. ref. w j j h max. max. tantalum wire nib identifies anode (+) terminal
document number: 40081 for technical questions, contact: tantalum@vishay.com www.vishay.com revision: 19-jan-10 150 t95 solid tantalum chip capacitors, t antamount ? , hi-rel cots, c onformal coated case vishay sprague case code l (max.) w h a b d (ref.) j (max.) v 0.143 [3.63] 0.104 0.010 [2.65 0.25] 0.051 0.010 [1.3 0.25] 0.023 0.010 [0.58 0.25] 0.085 0.015 [2.16 0.37] 0.115 [2.9] 0.004 [0.1] x 0.285 [7.24] 0.104 0.010 [2.65 0.25] 0.051 0.010 [1.3 0.25] 0.040 0.020 [1.0 0.5] 0.200 0.027 [5.08 0.69] 0.243 [6.2] 0.004 [0.1] y 0.285 [7.24] 0.104 0.010 [2.65 0.25] 0.069 0.010 [1.75 0.25] 0.040 0.020 [1.0 0.5] 0.200 0.027 [5.08 0.69] 0.243 [6.2] 0.004 [0.1] z 0.285 [7.24] 0.104 0.010 [2.65 0.25] 0.104 0.010 [2.65 0.25] 0.040 0.020 [1.0 0.5] 0.200 0.027 [5.08 0.69] 0.243 [6.2] 0.004 [0.1] note ? the anode termination (d less b) wi ll be a minimum of 0.010" (0.25 mm) ratings and case codes f 4 v 6.3 v 10 v 16 v 20 v 25 v 35 v 50 v 0.15 s 0.22 s 0.33 s 0.47 s 0.68 ss 1.0 ss 1.5 ssv 2.2 s s v x 3.3 ssvxy 4.7 ssvxxzc 6.8 s s v a/x x y z d 10 svxxyc/yzr 15 v x b/x b/y z z d/r r 22 x x y z z r r 33 x z z d/r r 47 y y z r d 68 y r r 100 z z r c/d r r 120 d/r r 150 d/r d r 180 r r 220 r d/r r 270 d 330 r d/r r 390 r 470 d 680 r r dimensions in inches [millimeters]
t95 vishay sprague solid tantalum chip capacitors, t antamount ? , hi-rel cots, conformal coated case www.vishay.com for technical questions, contact: tantalum@vishay.com document number: 40081 151 revision: 19-jan-10 notes (1) capacitance tolerance: k, m (2) termination and packaging: c, e, h, l (3) reliability level: a, s, z (4) surge current: a, b, s (5) esr: l, s (6) reliability level: a, b, s, z standard ratings capacitance (f) case code part number max. dc leakage at + 25 c (a) max. df at + 25 c 120 hz (%) std. (s) max. esr at + 25 c 100 khz ( ) low (l) max. esr at + 25 c 100 khz ( ) 4 wvdc at + 85 c, 2.7 wvdc at + 125 c 6.8 s t95s685(1)004(2)(3)(4)l 0.5 6 n/a 2.000 10 s t95s106(1)004(2)(3)(4)l 0.5 6 n/a 2.000 15 v t95v156(1)004(2)(3)(4)l 0.6 6 n/a 1.500 22 x t95x226(1)004(2)(3)(4)l 0.9 6 n/a 1.000 33 x t95x336(1)004(2)(3)(4)l 1.3 6 n/a 1.000 47 y t95y476(1)004(2)(3)(4)l 1.9 6 n/a 0.600 68 y t95y686(1)004(2)(3)(4)l 2.7 6 n/a 0.600 100 z t95z107(1)004(2)(3)(4)l 4.0 6 n/a 0.400 270 d t95d277(1)004(2)(3)(4)(5) 10.8 8 0.130 0.060 330 r t95r337(1)004(2)(3)(4)(5) 13.2 8 0.130 0.080 6.3 wvdc at + 85 c, 4 wvdc at 125 c 4.7 s t95s475(1)6r3(2)(3)(4)l 0.5 6 n/a 2.000 6.8 s t95s685(1)6r3(2)(3)(4)l 0.5 6 n/a 2.000 10 v t95v106(1)6r3(2)(3)(4)l 0.6 6 n/a 1.500 15 x t95x156(1)6r3(2)(3)(4)l 0.9 6 n/a 1.000 22 x t95x226(1)6r3(2)(3)(4)l 1.4 6 n/a 1.000 47 y t95y476(1)6r3(2)(3)(4)l 2.8 6 n/a 0.600 100 z t95z107(1)6r3(2)(3)(4)l 6.0 6 n/a 0.400 180 r t95r187(1)6r3(2)(3)(4)(5) 10.8 8 0.130 0.080 220 d t95r227(1)6r3(2)(6)(4)(5) 22.0 8 0.140 0.065 220 r t95r227(1)6r3(2)(3)(4)(5) 13.2 8 0.130 0.080 390 r t95r397(1)6r3(2)(6)(4)(5) 23.4 8 0.130 0.045 470 d t95d477(1)6r3(2)(3)(4)(5) 28.2 10 0.130 0.060 680 r t95r687(1)6r3(2)(3)(4)(5) 40.8 12 0.090 0.045 10 wvdc at + 85 c, 7 wvdc at 125 c 3.3 s t95s335(1)010(2)(3)(4)l 0.5 6 n/a 2.500 4.7 s t95s475(1)010(2)(3)(4)l 0.5 6 n/a 2.000 6.8 v t95v685(1)010(2)(3)(4)l 0.7 6 n/a 2.000 10 x t95x106(1)010(2)(3)(4)l 1.0 6 n/a 1.500 15 b t95b156(1)010(2)(6)(4)(5) 2.4 6 0.75 0.550 15 x t95x156(1)010(2)(3)(4)l 1.5 6 n/a 1.000 22 y t95y226(1)010(2)(3)(4)l 2.2 6 n/a 0.600 33 z t95z336(1)010(2)(3)(4)l 3.3 6 n/a 0.400 47 z t95z476(1)010(2)(3)(4)l 4.7 6 n/a 0.400 100 r t95r107(1)010(2)(3)(4)(5) 10.0 8 0.140 0.075 120 d t95d127(1)010(2)(6)(4)(5) 12.0 8 0.140 0.085 120 r t95r127(1)010(2)(6)(4)(5) 12.0 8 0.140 0.070 150 d t95d157(1)010(2)(3)(4)(5) 15.0 8 0.140 0.075 150 r t95r157(1)010(2)(3)(4)(5) 15.0 8 0.130 0.065 220 d t95d227(1)6r3(2)(6)(4)(5) 22.0 8 0.140 0.065 220 r t95r227(1)010(2)(3)(4)(5) 22.0 8 0.130 0.055 330 d t95d337(1)010(2)(6)(4)(5) 33.0 8 0.140 0.065 330 r t95r337(1)010(2)(3)(4)(5) 33.0 8 0.130 0.045 680 r t95r687(1)010(2)(3)(4)(5) 68.0 14 0.090 n/a
document number: 40081 for technical questions, contact: tantalum@vishay.com www.vishay.com revision: 19-jan-10 152 t95 solid tantalum chip capacitors, t antamount ? , hi-rel cots, c onformal coated case vishay sprague notes (1) capacitance tolerance: k, m (2) termination and packaging: c, e, h, l (3) reliability level: a, s, z (4) surge current: a, b, s (5) esr: l, s (6) reliability level: a, b, s, z standard ratings capacitance (f) case code part number max. dc leakage at + 25 c (a) max. df at + 25 c 120 hz (%) std. (s) max. esr at + 25 c 100 khz ( ) low (l) max. esr at + 25 c 100 khz ( ) 16 wvdc at + 85 c, 10 wvdc at + 125 c 2.2 s t95s225(1)016(2)(3)(4)l 0.5 6 n/a 3.500 3.3 s t95s335(1)016(2)(3)(4)l 0.5 6 n/a 2.500 4.7 v t95v475(1)016(2)(3)(4)l 0.8 6 n/a 2.000 6.8 x t95x685(1)016(2)(3)(4)l 1.1 6 n/a 1.500 6.8 a t95a685(1)016(2)(6)(4)(5) 1.1 6 2.800 0.800 10 x t95x106(1)016(2)(3)(4)l 1.6 6 n/a 1.500 15 b t95b156(1)016(2)(3)(4)(5) 2.4 6 0.750 0.550 15 y t95y156(1)016(2)(3)(4)l 2.4 6 n/a 0.600 22 z t95z226(1)016(2)(3)(4)l 3.5 6 n/a 0.400 33 z t95z336(1)016(2)(3)(4)l 5.3 6 n/a 0.400 68 r t95r686(1)016(2)(3)(4)(5) 10.9 6 0.600 0.095 100 c t95c107(1)016(2)(6)(4)(5) 16.0 8 0.600 0.090 100 d t95d107(1)016(2)(6)(4)(5) 16.0 8 0.140 0.080 150 d t95d157(1)016(2)(3)(4)(5) 24.0 8 0.140 0.085 180 r t95r187(1)016(2)(6)(4)(5) 28.8 8 0.130 0.055 220 r t95r227(1)016(2)(6)(4)(5) 35.2 8 0.120 0.055 330 r t95r337(1)016(2)(6)(4)(5) 52.8 14 0.110 0.055 20 wvdc at + 85 c, 13 wvdc at + 125 c 1.5 s t95s155(1)020(2)(3)(4)l 0.5 6 n/a 3.500 2.2 s t95s225(1)020(2)(3)(4)l 0.5 6 n/a 3.500 3.3 v t95v335(1)020(2)(3)(4)l 0.7 6 n/a 3.000 4.7 x t95x475(1)020(2)(3)(4)l 0.9 6 n/a 1.500 6.8 x t95x685(1)020(2)(3)(4)l 1.4 6 n/a 1.500 10 y t95y106(1)020(2)(3)(4)l 2.0 6 n/a 1.000 15 z t95z156(1)020(2)(3)(4)l 3.0 6 n/a 0.600 22 z t95z226(1)020(2)(3)(4)l 4.4 6 n/a 0.400 47 d t95d476(1)020(2)(6)(4)(5) 9.4 6 0.190 0.095 47 r t95r476(1)020(2)(3)(4)l 9.4 6 0.200 0.110 100 r t95r107(1)020(2)(6)(4)s 20.0 8 0.140 n/a 120 r t95r127(1)020(2)(6)(4)(5) 24.0 8 0.140 0.080 150 r t95r157(1)020(2)(3)(4)(5) 30.0 8 0.140 0.075 25 wvdc at + 85 c, 17 wvdc at + 125 c 0.68 s t95s684(1)025(2)(3)(4)l 0.5 4 n/a 5.000 1 s t95s105(1)025(2)(3)(4)l 0.5 4 n/a 3.500 1.5 s t95s155(1)025(2)(3)(4)l 0.5 6 n/a 3.500 2.2 v t95v225(1)025(2)(3)(4)l 0.6 6 n/a 2.000 3.3 x t95x335(1)025(2)(3)(4)l 0.8 6 n/a 1.500 4.7 x t95x475(1)025(2)(3)(4)l 1.2 6 n/a 1.500 6.8 y t95y685(1)025(2)(3)(4)l 1.7 6 n/a 1.000 10 c t95c106(1)025(2)(3)(4)(5) 2.5 6 0.570 0.280 10 y t95y106(1)025(2)(3)(4)l 2.5 6 n/a 1.000 15 z t95z156(1)025(2)(3)(4)l 3.8 6 n/a 0.600 33 d t95d336(1)025(2)(3)(4)(5) 8.3 6 0.260 0.130 33 r t95r336(1)025(2)(3)(4)(5) 8.3 6 0.250 0.130 47 d t95d476(1)025(2)(3)(4)(5) 11.8 6 0.260 0.130 68 d t95d686(1)025(2)(6)(4)(5) 17.0 6 0.260 0.150 68 r t95r686(1)025(2)(6)(4)(5) 17.0 6 0.200 0.095 100 r t95r107(1)025(2)(6)(4)(5) 25 8 0.200 0.090
t95 vishay sprague solid tantalum chip capacitors, t antamount ? , hi-rel cots, conformal coated case www.vishay.com for technical questions, contact: tantalum@vishay.com document number: 40081 153 revision: 19-jan-10 notes (1) capacitance tolerance: k, m (2) termination and packaging: c, e, h, l (3) reliability level: a, s, z (4) surge current: a, b, s (5) esr: l, s (6) reliability level: a, b, s, z standard ratings capacitance (f) case code part number max. dc leakage at + 25 c (a) max. df at + 25 c 120 hz (%) std. (s) max. esr at + 25 c 100 khz ( ) low (l) max. esr at + 25 c 100 khz ( ) 35 wvdc at + 85 c, 23 wvdc at + 125 c 0.15 s t95s154(1)035(2)(3)(4)l 0.5 4 n/a 18.000 0.22 s t95s224(1)035(2)(3)(4)l 0.5 4 n/a 15.000 0.33 s t95s334(1)035(2)(3)(4)l 0.5 4 n/a 12.000 0.47 s t95s474(1)035(2)(3)(4)l 0.5 4 n/a 9.000 0.68 s t95s684(1)035(2)(3)(4)l 0.5 4 n/a 5.000 1 s t95s105(1)035(2)(3)(4)l 0.5 4 n/a 3.500 1.5 v t95v155(1)035(2)(3)(4)l 0.5 6 n/a 3.000 2.2 x t95x225(1)035(2)(3)(4)l 0.8 6 n/a 2.000 3.3 y t95y335(1)035(2)(3)(4)l 1.2 6 n/a 1.500 4.7 z t95z475(1)035(2)(3)(4)l 1.6 6 n/a 0.800 6.8 z t95z685(1)035(2)(6)(4)l 2.4 6 n/a 0.800 10 z t95z106(1)035(2)(3)(4)l 3.5 6 n/a 0.600 15 d t95d156(1)035(2)(3)(4)(5) 5.3 6 0.410 0.270 15 r t95r156(1)035(2)(3)(4)(5) 5.3 6 0.380 0.190 22 r t95r226(1)035(2)(3)(4)(5) 7.7 6 0.280 0.240 33 r t95r336(1)035(2)(3)(4)(5) 11.6 6 0.280 0.200 50 wvdc at + 85 c, 33 wvdc at + 125 c 4.7 c t95c475(1)050(2)(3)(4)(5) 2.4 6 1.4 0.8 6.8 d t95d685(1)050(2)(3)(4)(5) 3.4 6 0.820 0.450 10 r t95r106(1)050(2)(3)(4)(5) 5.0 6 0.650 0.500 15 r t95r156(1)050(2)(3)(4)(5) 7.5 6 0.400 0.350 22 r t95r226(1)050(2)(3)(4)(5) 11.0 6 0.390 0.300
document number: 91000 www.vishay.com revision: 18-jul-08 1 disclaimer legal disclaimer notice vishay all product specifications and data are subject to change without notice. vishay intertechnology, inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, ?vishay?), disclaim any and all liability fo r any errors, inaccuracies or incompleteness contained herein or in any other disclosure relating to any product. vishay disclaims any and all li ability arising out of the use or application of any product describ ed herein or of any information provided herein to the maximum extent permit ted by law. the product specifications do not expand or otherwise modify vishay?s terms and conditions of purcha se, including but not limited to the warranty expressed therein, which apply to these products. no license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of vishay. the products shown herein are not designed for use in medi cal, life-saving, or life-sustaining applications unless otherwise expressly indicated. customers using or selling vishay products not expressly indicated for use in such applications do so entirely at their own risk and agree to fully indemnify vishay for any damages arising or resulting from such use or sale. please contact authorized vishay personnel to obtain written terms and conditions regarding products designed for such applications. product names and markings noted herein may be trademarks of their respective owners.
|
